Contact us on WhatsApp: +86-13913801295
An access control high-speed door is an industrial entrance management solution that combines a high-speed roll-up door with an access control system. It can control personnel and vehicle access through card access, fingerprint recognition, facial recognition, remote opening, and other methods. MEGODOOR can provide customized high-speed door and access control linkage solutions according to different application scenarios, such as factories, warehouses, cleanrooms, equipment rooms, and production areas, helping enterprises improve entrance management efficiency and safety control.
What Is an Access Control High-Speed Door?
An access control high-speed door is a smart industrial door solution that adds an access control system to a high-speed roll-up door. It is no longer just an automatic door for opening and closing, but a smart entrance system with personnel identification, permission management, remote control, and access record functions.
In factories, warehouses, laboratories, cleanrooms, equipment protection areas, and zones separating offices from production areas, many entrances should not be freely accessed by all personnel. If only push buttons or radar sensors are used, the door is convenient to operate, but permission control is relatively limited. By adding an access control system, the high-speed door can open only for authorized personnel, allowing better control of people entering and leaving specific areas.
MEGODOOR can integrate high-speed doors with card readers, fingerprint access control, facial recognition access control, password access control, remote opening systems, and other access management devices according to customer requirements.
Where Can Access Control High-Speed Doors Be Used?
Access control high-speed doors are suitable for industrial and commercial areas where personnel access needs to be restricted and entrance management efficiency needs to be improved.
1. Factory Production Workshops
Some production areas involve equipment safety, process control, or personnel permission requirements. Ordinary staff should not enter these areas freely. A high-speed door with an access control system can control door opening according to personnel authorization.
2. Warehouses and Logistics Passages
For warehouse entrances, different access permissions may be required for managers, warehouse staff, forklift drivers, and other personnel. Card access or facial recognition access control can be linked with the high-speed door for more efficient management.
3. Cleanrooms and Laboratories
Clean areas usually require controlled personnel access. A high-speed door with an access control system can help reduce unauthorized entry. At the same time, fast opening and closing can help maintain a more stable indoor environment.
4. Equipment Rooms and Automated Production Lines
Some equipment areas need to restrict access by non-operating personnel. MEGODOOR can provide customized linkage solutions for high-speed doors, access control systems, PLC signals, AGV communication, and equipment control signals according to site requirements.
5. Separation Between Office Areas and Production Areas
Access control high-speed doors can also be used between office areas and production zones, allowing authorized personnel to pass quickly while preventing unauthorized access.
Multiple Access Control Options for Different Management Needs
MEGODOOR high-speed doors can be connected with different types of access control systems according to customer requirements.
Card Access High-Speed Door
Card access is a common access control method for industrial doors. Employees use IC cards, ID cards, or work badges to unlock the door. After successful verification, the access control system sends an opening signal to the high-speed door control box, and the door opens automatically. This solution is suitable for factories, warehouses, workshop passages, and other areas with frequent access.
Fingerprint Access High-Speed Door
Fingerprint access control is suitable for areas with higher identity verification requirements. Compared with ordinary card access, fingerprint recognition reduces the risk of card sharing or unauthorized use. It is suitable for laboratories, equipment rooms, material storage rooms, and important production areas.
Facial Recognition High-Speed Door
Facial recognition access control is more convenient because personnel do not need to carry cards. For factory entrances with many employees and frequent access, a facial recognition high-speed door can improve traffic efficiency and make permission management easier.
Remote Door Opening
For guard rooms, offices, and remote management scenarios, the high-speed door can be connected to a remote opening system. Managers can open the door remotely when needed, which is convenient for temporary visitors, delivery personnel, and authorized vehicles.
Optional Brand Access Control Systems
MEGODOOR can work with commonly used access control brands such as Hikvision according to customer needs. For companies that already have an access control management platform, MEGODOOR can also provide linkage suggestions based on the existing control logic.
How Does the Access Control System Link with the High-Speed Door?
The basic working logic is simple: after personnel identity verification is completed, the access control system outputs an opening signal. The high-speed door control system receives the signal and performs the opening action. After personnel or vehicles pass through, the door can close automatically according to delay settings, loop detectors, photoelectric sensors, radar detection, or other safety devices.
Common linkage methods include:
- The access control system outputs an opening signal after successful verification;
- The high-speed door opens automatically after receiving the signal;
- The door closes automatically after personnel or vehicles pass through;
- Opening delay time can be adjusted;
- Safety devices such as photoelectric sensors, safety bottom edge, and radar can be added;
- Remote control or background management systems can be connected;
- Open-position, close-position, and other feedback signals can be provided according to project requirements.
This linkage method keeps the advantages of high-speed doors, such as fast opening speed and good sealing performance, while adding permission management functions through the access control system.
Features of MEGODOOR Access Control High-Speed Doors
1. More Controllable Access
The door can be opened through card access, fingerprint recognition, facial recognition, or other authorization methods, helping reduce unauthorized entry into production areas and improving entrance management.
2. Suitable for Industrial Sites
MEGODOOR high-speed doors can be customized according to site conditions, including door size, frame material, curtain color, vision window position, and control method. They are suitable for factories, warehouses, workshops, cleanrooms, and other industrial environments.
3. Linkage with Multiple Systems
In addition to access control systems, the high-speed door can also be linked with AGV systems, PLC, air shower rooms, equipment signals, loop detectors, radar sensors, push buttons, remote controls, and other control methods to meet different automation requirements.
4. Improved Management Efficiency
For areas with frequent personnel access, access control high-speed doors can reduce the need for manual supervision and make entrance management clearer and more efficient.
5. Optional Safety Configurations
MEGODOOR high-speed doors can be equipped with photoelectric sensors, safety bottom edge, safety light curtain, warning lights, radar sensors, and other safety protection devices to help reduce collision risks during door operation.
What Should Be Considered When Selecting an Access Control High-Speed Door?
When choosing an access control high-speed door, several factors should be considered according to actual site requirements.
First, it is necessary to define the traffic object: personnel, forklifts, vehicles, or mixed pedestrian and vehicle traffic. Different traffic conditions require different opening methods and safety protection configurations.
Second, the access control method should be confirmed. For ordinary employee access, card access can meet most requirements. For areas with higher management requirements, fingerprint or facial recognition access control can be considered.
Third, it is important to determine whether remote opening, background permission management, access record inquiry, and other functions are needed. If the company already has an access control platform, the interface method should be confirmed in advance for easier system integration.
Finally, the working environment of the high-speed door itself should be considered, including opening size, operating frequency, sealing requirements, dust control requirements, transparent vision windows, stainless steel frame requirements, and other site conditions.
MEGODOOR can provide overall recommendations for the door body, control method, access control linkage, and safety protection based on customer site conditions, helping customers select a more suitable access control high-speed door solution.
An access control high-speed door is not only an industrial high-speed door, but also part of an intelligent factory entrance management system. By combining a high-speed door with card access, fingerprint access, facial recognition, remote opening, and other access control systems, enterprises can achieve personnel permission control, area separation, fast access, and safer management.
As an industrial door manufacturer, MEGODOOR can provide customized access control high-speed door solutions according to different site requirements. Whether for factory workshops, warehouse logistics passages, cleanrooms, equipment rooms, or the separation between office and production areas, MEGODOOR can offer a suitable high-speed door access control linkage solution based on actual working conditions.
